Hey guys,Thanks for visiting our official website. Would you like to get our latest catalogue with price list?As some private models CANNOT be displayed online, we sincerely invite you to input email address to get the file immediately.Thanks & best regards,Dacy | SrecyclingSales Manager
Tel: (86)135-2408-3356
Email: dacyrecycling@gmail.com
Professional press machine for aluminum cans, ubcs.
Automatic operation, little labour cost.
High efficiency with cheap price.
Automatic Metal Baler for aluminum cans
Usage：to press non ferrous metal scrap, such as UBC,
light aluminum scrap, scrap copper etc.
Appearance：frame structure, oil cylinder（main cylinder, side cylinder, door cylinder）, hopper, hydraulic system, electrical system.
The packet method | Side Push | |
The nominal thrust | The pressure cylinder | 1000KN |
Lateral pressure cylinder | 1000KN | |
The small door cylinder | 250KN | |
Stroke | The pressure cylinder | 1200mm |
Lateral pressure cylinder | 1000mm | |
The small door cylinder | 350mm | |
Compression chamber size （L×W×H） | 1000*750*2000mm | |
Packet block size （L×W×H） | 300x300mm | |
The production efficiency | 1-1.5tons per hour | |
The system pressure | 25Mpa | |
Pump | HY250 | |
A single cycle time | ≤70s | |
Power | 37KW-6P | |
The motor speed （r/min） | 1180 | |
Pump discharge （ml/r） | hy160 | |
Tank capacity （L） | 1500 | |
Weight of machine | About 6 tons | |
Operating mode | PLC Fully automatic one button operation.Continuous feed detection device and hopper | |
Brand Configuration
Electrical | French Schneider |
Oil Pump | JINDA High pressure oil pump |
Oil cylinder seals | Germany USK |
Oil pipe seals | Germany FOLON.A |
Wearing plate | HARDOX500 |
The tubing connector | USA EATON |
PLC | Germany Siemens |
Pressure Sensor | Germany WIKA |
Limit switch | French Schneider |
Advantage
The hydraulic system adopts the frame structure, oil pump is arranged on the side of the tank, the hydraulic oil in the tank is directly extracted, the hydraulic system is quickly supplied to the hydraulic valve group system to ensure the rapid advance of the hydraulic cylinder to do the piston movement;
Equipped with oil filter;
Using soft hose to connect the oil filter and the oil pump. When the machine is working, it can be shocked to protect the pump and motor.
The motor base is equipped with four damping pads.
Large-capacity hopper design, with the compression chamber connected straight down, not blocking material.
Italy ATOS pressure sensor, you can set the pressure on the touch screen.
The fan cooling system cools the hydraulic oil.
Schneider's electrical system, PLC + touch screen.
H-type hose connector, do not leak oil.
Internal press chamber and master cylinder head are with Germany Dillinger material, high strength, high wear resistance.
The front end of the feed chamber is equipped with a blade, and the side cylinder is pushed in place, and the excess waste can be cut off at the same time.